2.4-inch Industrial AMOLED Display

Product specification

Features :

This AMOLED display offers a larger 2.4-inch canvas, bringing your visuals to life with enhanced clarity and immersive colors.
With a rich 450x600 pixel resolution, it ensures every detail is sharp and defined, making it perfect for applications that require both precision and style.
The MIPI and SPI and MCU interfaces provide seamless integration, supporting versatile device development.
The self-emissive AMOLED technology delivers deep blacks, high contrast, and energy efficiency, making it ideal for wearables, portable displays, and smart devices that demand long battery life.

Interface & Electrical Characteristics:

LCD size(inch):	2.4 (Diagonal)
Resolution:	450(H)×600(V)
Pixel Pitch:	81.99(H)x81.99(V)
Active Area(mm):	36.72(H)×48.96(V)
Module Size(mm):	51.56×38.72×0.78
Display type:	Rigid AMOLED
Interface:	MIPI&MCU&SPI
View Direction:	ALL
Power Supply:	3.3
Luminance(cd/m2):	800(Typ.)

Interface:

Pin No.	Symbol	I/O	Description
1	GND	P	Ground.
2	GND	P	Ground.
3	ELVSS	P	Negative power supply for panel.
4	ELVSS	P	Negative power supply for panel.
5	GND	P	Ground.
6	ELVDD	P	Positive power supply for panel.
7	ELVDD	P	Positive power supply for panel.
8	GND	P	Ground.
9	VCI	P	Power supply for display driver IC interface analogic system.
10	GND	P	Ground.
11	VDDIO	P	Power supply for display driver IC interface and logic system.
12	GND	P	Ground.
13	TE1	O	IC Status active reporting pin.
14	SWIRE	O	Swire protocol setting pin of Power IC.
15	TE	O	Tearing effect output pin to synchronize MCU to frame writing, activated by S/W command. When this pin is not activated, this pin is output low.
16	RESX	I	Display driver reset, must be applied to properly initialize the chip. Signal is active low.
17	GND	P	Ground.
18	SDI_RDX	I/O	SDl: Serial input signal in SPl l/F. The data is input on the rising edge of the SCL signal. RDX:Reads strobe signal to write data when RDX is “Low" in 80-series MPU interface.
19	DCX	I	Display data/command selection in 80-series MPUl/F and 4-wire SPl l/F.
20	SCL	I	WRX :Writes strobe signal to write data when WRX is “Low" in 80-series MPU I/F. SCL: A synchronous clock signal in SPl l/F.
21	CSX	I	Chip select input pin( "Low" enable)in 80-series.
22-29	D0-D7	I/O	8-bit bi-directional data bus for 80-series MPU l/Fand 8-bit input data bus for RGB l/F.
30	GND	P	Ground.
31	IM1	I/O	Interface type selection.
32	IM0	I/0	Interface type selection.
33	GND	P	Ground.
34	GND	P	Ground.
35	D0P	I/O	Differential data signals if MIPI interface.
36	D0N	I/O	Differential data signals if MIPI interface.
37	GND	P	Ground.
38	GND	P	Ground.
39	CLKP	I	Differential data signals if MIPI interface.
40	CLKN	I	Differential data signals if MIPI interface.
41	GND	P	Ground.
42	GND	P	Ground.
43	MTP	P	MTP programming power supply. Must be left open or connected to GND in normal condition.
44	GND	P	Ground.
45	GND	P	Ground.

Electrical Characteristics:

Parameter	Symbol:	Min.	Typ.	Max.	Unit
OLED input Voltage	ELVDD	2.0	3.6	6	V
OLED output voltage	VDDIO	-4.7	-3.6	-0.4	V

[!--bname--]

2.4-inch Industrial AMOLED Display

This AMOLED display offers a larger 2.4-inch canvas, bringing your visuals to life with enhanced clarity and immersive colors. With a rich 450x600 pixel resolution.